One of Hottest for Jet Mill Of Gmp/Fda Standard 0.5-30μm - Battery Industry And Other Chemical Material Use Fluidized-bed Jet Mill – Qiangdi

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our products are greatly acknowledged and reliable by users and may fulfill repeatedly shifting financial and social wants for Laboratory Jet Mill, Grinder, High Automation Jet Mill Micronizer, "Making the Products and solutions of Superior Quality" may be the eternal target of our company. We make unremitting attempts to comprehend the objective of "We Will Often Preserve in Pace along with the Time".

One of Hottest for Jet Mill Of Gmp/Fda Standard 0.5-30μm - Battery Industry And Other Chemical Material Use Fluidized-bed Jet Mill – Qiangdi Detail:

Fluidized bed pneumatic mill is the equipment used to crush dry materials to superfine powder, with the basic structure as follows:

The Product is a fluidized bed pulverizer with the compression air as the crushing medium. The mill body is divided into 3 sections, namely the crushing area, transmission area and the grading area. The Grading Area is provided with the grading wheel, and the speed can be adjusted by the converter. The crushing room is composed of the crushing nozzle, feeder, etc. The ring sir supply disc outside the crushing canister is connected with the crushing nozzle.

The material enters the crushing room through the material feeder. The compression air nozzles into the crushing room in high speed through the specially equipped four crushing nozzles. The material gains acceleration in the ultrasonic jetting flow and repeatedly impact and collide at the central converging point of the crushing room until it is crushed. The crushed material enters the grading room with the upflow. Because the grading wheels spin at high speed, when the material ascends, the particles are under the centrifugal force created from the grading rotors as well as the centripetal force created from the viscosity of the airflow. When the particles is under the centrifugal force larger than the centripetal force, the coarse particles with larger diameter than the required grading particles will not enter the inner chamber of the grading wheel and will return to the crushing room to be crushed. The fine particles that comply with the diameter of the required grading particles will enter the grading wheel and flow into the cyclone separator of the inner chamber of the grading wheel with the airflow and get collected by the collector. The filtered air is released from the air intaker after the filter bag treatment.

The pneumatic pulverizer is composed of the air compressor, oil remorer，gas tank, freeze dryer, air filter, fluidized bed pneumatic pulverizer, cyclone separator, collector, air intaker and others.

Detail show

Ceramics pasting and PU lining in whole grinding parts contacting with products to avoid scrap iron taking in lead to the invalid effect of terminal products.

1.Precision ceramic coatings, 100% eliminate the iron pollution from material classification process to assure the purity of the products. Especially suitable for iron content requirements of the electronic materials, such as cobalt high acid, lithium manganese acid, lithium iron phosphate, Ternary Material, lithium carbonate and Acid lithium nickel and cobalt etc battery cathode material.

2. No rise in temperature: The temperature will not increase as the materials are pulverized under the working conditions of pneumatic expansion and the temperature in the milling cavity is kept normal.

3.Endurance: Applied to materials with Mohs Hardness below Grade 9. since the milling effect only involves the impact and collision among the grains rather than the collision with the wall .

4.Energy-effective: Saving 30%-40% compared with other air pneumatic pulverizers.

5.Inert gas can be used as media for milling flammable and explosive materials.

6. The whole system is crushed, the dust is low, the noise is low, the production process is clean and environmental protection.

7. The system adopts intelligent touch screen control, easy operation and accurate control.

8. Compact structure: the chamber of the main machine composes the closes circuit for crushing.

The flow chart is standard milling processing，and can be adjusted for customers.

model	QDF-120	QDF-200	QDF-300	QDF-400	QDF-600	QDF-800
Working pressure (Mpa)	0.75~0.85	0.75~0.85	0.75~0.85	0.75~0.85	0.75~0.85	0.75~0.85
Air consumption (m³/min)	2	3	6	10	20	40
Diameter of fed material ( mesh)	100~325	100~325	100~325	100~325	100~325	100~325
Fineness of crushing(d₉₇μm)	0.5~80	0.5~80	0.5~80	0.5~80	0.5~80	0.5~80
Capacity (kg/h)	0.5~15	10~120	50~260	80~450	200~600	400~1500
Installed power (kw)	20	40	57	88	176	349

Material	Type	Diameter of the fed particles	Diameter of the discharged particles	Output（kg/h）	Air consumption (m³/min)
Cerium oxide	QDF300	400(Mesh)	d₉₇,4.69μm	30	6
Flame retardant	QDF300	400(Mesh)	d₉₇,8.04μm	10	6
Chromium	QDF300	150(Mesh)	d₉₇,4.50μm	25	6
Phrophyllite	QDF300	150(Mesh)	d₉₇,7.30μm	80	6
Spinel	QDF300	300(Mesh)	d₉₇,4.78μm	25	6
Talcum	QDF400	325(Mesh)	d₉₇,10μm	180	10
Talcum	QDF600	325(Mesh)	d₉₇,10μm	500	20
Talcum	QDF800	325(Mesh)	d₉₇,10μm	1200	40
Talcum	QDF800	325(Mesh)	d₉₇,4.8μm	260	40
Calcium	QDF400	325(Mesh)	d₅₀,2.50μm	116	10
Calcium	QDF600	325(Mesh)	d₅₀,2.50μm	260	20
Magnesium	QDF400	325(Mesh)	d₅₀,2.04μm	160	10
Alumina	QDF400	150(Mesh)	d₉₇,2.07μm	30	10
Pearl power	QDF400	300(Mesh)	d₉₇,6.10μm	145	10
Quartz	QDF400	200(Mesh)	d₅₀,3.19μm	60	10
Barite	QDF400	325(Mesh)	d₅₀,1.45μm	180	10
Foaming agent	QDF400	d₅₀,11.52μm	d₅₀,1.70μm	61	10
Soil kaolin	QDF600	400(Mesh)	d₅₀,2.02μm	135	20
Lithium	QDF400	200(Mesh)	d₅₀,1.30μm	60	10
Kirara	QDF600	400(Mesh)	d₅₀,3.34μm	180	20
PBDE	QDF400	325(Mesh)	d₉₇,3.50μm	150	10
AGR	QDF400	500(Mesh)	d₉₇,3.65μm	250	10
Graphite	QDF600	d₅₀,3.87μm	d₅₀,1.19μm	700	20
Graphite	QDF600	d₅₀,3.87μm	d₅₀,1.00μm	390	20
Graphite	QDF600	d₅₀,3.87μm	d₅₀,0.79μm	290	20
Graphite	QDF600	d₅₀,3.87μm	d₅₀,0.66μm	90	20
Concave-convex	QDF800	300(Mesh)	d₉₇,10μm	1000	40
Black silicon	QDF800	60(Mesh)	400(Mesh)	1000	40